Google Maps ads not working: what to check first

Igor Ivitskiy

Igor Ivitskiy

  • #6 in The Top Most Influential PPC Experts
About the author ↓

Published 13 min read

In this article
  1. A four-level check for a local campaign that is quiet
  2. Level 1. The link between Google Ads and your Business Profile
  3. Level 2. Budget, bids, and radius: why nobody nearby is reached
  4. Level 3. Review status and limits that hide a local ad
  5. Level 4. Directions are coming in, and the phone stays quiet
  6. A checklist before you raise the budget
  7. When this does not apply
  8. Questions and answers
  9. A higher budget will not bring the pins back
  10. A direction request is not a phone call
  11. "Not showing" in the preview is not a dead campaign
In short: Check four things in order: the location asset, the radius and budget, the policy line, then the phone and hours. Raise the budget only after the address is approved in this campaign.

Google Maps ads are not working in two different ways, and a bigger budget does not sort them out. Either the ad never reaches the map, or people already tap for directions and nobody calls.

The break is almost always in one of four places. The address is not linked to your Business Profile, not approved, or switched off inside this campaign. The radius is too tight, and the budget or the bid keeps the ad out of the auction. A policy limits delivery inside the places you chose. Or impressions and direction requests are already there, but the phone and the hours on the profile do not produce a call. What Google Maps advertising is, and which formats exist, is covered in what Google Maps advertising is.

I have run Google ads since 2006, and I keep seeing the same mistake: the daily amount goes up first. The money lands in ordinary search while the map stays empty, because Google does not sell pins on their own. That limit is stated in the help page on advertising in Google Maps.

A four-level check for a local campaign that is quiet

Walk down the list and stop at the first broken level. A lower level does not explain an empty map while a higher one is still unapproved. Forums tell you to raise the bid. The bid changes nothing if the address in this campaign is off or disapproved.

What you seeWhere to lookWhat it means
No impressions on the campaign or the addressLocation manager, Business locations tableThe profile link or the approval is not ready. Leave the budget alone.
The account-level asset is approved, and the campaign is set to No location assetAssets in the Campaigns menu, plus, Location, then No location assetThe asset is kept from showing here. Search can spend with nothing on the map.
Impressions exist, status mentions budget or bidCampaign status columnThe ad enters fewer auctions. Check the radius and excluded places first.
Impressions and directions exist, calls do notPhone and hours on the profileA direction tap is not a call. Check the number and the opening hours.

Level 1. The link between Google Ads and your Business Profile

The Business Profile on Maps and the ads account are different products. They follow different rules and different support teams. If the profile is suspended, editing the ad text will not restore it. If the ad is disapproved, changing a photo on the profile will not approve the ad.

The address in the ad comes from Maps and from the Business Profile, and that is where you correct it. The help page on location assets calls this a location asset. The older name, location extension, is the same thing: your place inside the ad.

On the account assets, you need an approved status, not a queue and not a disapproval. To turn the asset off in one campaign, open Assets in the Campaigns menu, select the plus button, then Location. Choose the campaign level, select the pencil icon, check that campaign, select No location asset, and select Save. That choice keeps the asset from showing here, even when the account-level asset is approved. The campaign setting wins. Search keeps spending, and the map shows no place.

A place marked temporarily or permanently closed does not appear in the final ad. An address Google does not recognize fails too. Choose Our locations when the place is yours. A Business Profile is the recommended source. Choose Affiliate locations when you sell inside a chain you do not own. The wrong type can be disapproved. You pick up to 10 Maps places only when a Business Profile and chain stores do not fit, and those places must be yours. When you link a Business Profile, apply a business name or label filter only if you need one. At the campaign, location groups keep a subset of the account locations.

If the profile is not in the account yet, this is a setup job, not a diagnosis. The linking steps are in how to set up Google Maps advertising. An empty address row means a larger budget buys other surfaces.

Check the campaign type. A line in Maps search can come from Search, Performance Max for store goals, a Smart campaign, or Shopping. A pin can come from Performance Max for store goals, a Smart campaign, a Travel campaign for Things to do, or Demand Gen. A plain Display campaign without store goals is not built for that pin. Zoom the map out too far and the pins leave the screen. That is the zoom, not a dead campaign.

Level 2. Budget, bids, and radius: why nobody nearby is reached

Come here only after the address in this campaign is approved and turned on. Otherwise you are fixing the wrong fault.

Google will not accept a radius under 1 km, a little over half a mile. A very small radius or a very small area can show only now and then, or not at all. That limit is in the help page on geographic targeting. A plumber who draws a circle around one block should not expect a pin every day.

Location is not exact in every case. Google builds it from a person’s settings, device, and behavior. The default reaches people in the area and people who showed interest in the area. Someone two states away who types “emergency plumber in your city” can see the ad and click, and that click will never become a visit.

If you only want people in your targeted locations, switch to Presence: people in or regularly in your targeted locations. Impressions usually drop, and that drop is not a new failure. Presence is not a wall. Someone who is regularly in the area can be on the road today. Without excluded cities you do not serve, some clicks still land wider. I read the locations report before I add money.

Limited by budget means the average daily amount is too small for the impressions your settings could get, so Google enters fewer auctions. Limited by bid strategy shows up when the bid cap is too low or the target is too tight. A Smart campaign with a low budget also serves less often. From August 17, 2026, Google changes budget-limited campaigns on Target CPA, Target ROAS, and Target CPC (Demand Gen only). It does not rewrite the daily budget or the bid targets. The Bid Target Adjustment Tool is available from July 6, 2026. That shift is not proof the pin is broken.

An old Smart campaign, after many edits, sometimes gets impressions and almost no clicks. I build an exact copy and pause the old one once the copy is allowed to serve. That is an observation, not a promise of clicks. Two copies running together only split the same demand.

If the clicks are real but the searches are not about your service, negative keywords are what keep that spend in check. How to set them for Maps is in negative keywords for Google Maps.

Level 3. Review status and limits that hide a local ad

An empty map is sometimes the result of a review status, not a bid mistake. Most reviews finish within one business day. Demand Gen and Discovery reviews can take 3-5 business days. Complex formats can take up to 7 business days. While the status says under review, do not touch the budget, the bid strategy, or the text. Any edit starts the clock again. What each status means is in the help page on review status.

Eligible means the ad can run. Eligible (limited) does not run in every situation: a surface or an industry policy gets in the way. Eligible (limited all locations) is stricter. People in your targeted places do not see the ad. People who only showed interest in those places might. An HVAC company can pay for clicks while the homeowner next door never sees the pin. Open policy details on that same row. Do not guess the industry from a forum.

The address is disapproved if you lack the owner’s approval, Google does not recognize it, the place is permanently closed, the location does not match the business, or the service is not sold there. The path is Tools, Shared library, Location manager. Status shows Not eligible, and a hover opens the details and an appeal. Extra symbols in the name are fixed on the Business Profile, then you unlink and link the profile again. A higher bid does not bypass a disapproved asset. The list is in the policy page on location asset requirements.

Level 4. Directions are coming in, and the phone stays quiet

Once the campaign is alive, look at what the click actually bought. On Search and standard campaigns, a direction request, a call, and a website visit are separate charged actions. Swiping through photos is not charged. A logo pin in Performance Max for store goals is often charged for views. The clicks row is not the calls row.

A call button does not have to appear on every impression. Google checks that the number belongs to the business you are advertising. Hours and the phone come from the profile. If the profile says closed, or the number is missing, a person gets directions and does not call.

StepWhich number to readIf that number is zero
FirstImpressions on the location assetYou are not on the map yet. Calls can wait.
SecondDirection tapsPeople see the ad and do not ask for the route. Go back to the query and the area.
ThirdCalls in the same datesDirections exist and calls do not. Open the phone and the hours.

Compare those same days in the Business Profile performance report. Calls and direction requests sit on separate lines. How to read that report is in the Business Profile performance report. If the profile shows calls and the front desk hears none, match the number on the profile with the number the desk actually answers. That is no longer a bid problem.

A checklist before you raise the budget

  1. The campaign type from level 1 can serve a Maps search line or a pin.
  2. The address is approved and turned on in this campaign.
  3. The profile place is not marked closed, Google recognizes the address, and the place is yours.
  4. The radius is at least 1 km. Presence is on if you want local people, and cities you do not serve are excluded.
  5. There is no disapproval and no limit across all locations. Policy details are read.
  6. You did not search your own query on Google. The campaign is getting impressions. The map is not zoomed out so far that pins hide.
  7. If directions exist without calls, the phone, the hours, and the profile report for the same days are checked.
  8. You touch the budget only when the status itself says the campaign is limited by budget or by the bid.

Do not type your own query into ordinary Google search. Those searches add impressions and can hurt your performance data. If you never click, the system can stop showing the ad to you. The preview tool looks at the Search network, not at the pin. If it says the ad is not showing, check billing and whether the account is suspended before you believe it. A preview in this tool can also disappear once the campaign reaches its average daily budget. I trust the impressions column over one preview screen. The limit of that tool is in the help page on finding your ad.

The step-by-step version for business owners is in my book on Google Ads.

Want the system, not scattered tips?

My e-book “19 Google Ads Secrets”: how to get the most out of Google Ads without draining your budget, drawn from real campaigns and tests.

See the book →

When this does not apply

This check is not for an online store with no place a person can visit and no address Google will approve. If you only ship and you have no place on the map, you need a different campaign, not a pin.

This check is not for an account that is dark as a whole. While billing verification is running, or the account is temporarily suspended, ads do not serve anywhere. Fix that status before you touch the map.

This check will not give you “Maps only, and not a single search click.” You cannot serve ads only on Google Maps. If any search click is unacceptable, this format will not isolate the spend.

Questions and answers

A higher budget will not bring the pins back

Not while the location asset is disapproved or switched off. The extra money buys other surfaces of the same campaign. Open the address row on this campaign first, and only then read a limited-by-budget status.

A direction request is not a phone call

Direction taps, calls, and website visits are charged separately. Zero calls next to live direction requests point to the phone and the hours on the profile, not to the bid.

“Not showing” in the preview is not a dead campaign

The tool looks at Google search and may not reflect all campaign activity. A pin also depends on how far the map is zoomed. Read impressions on the campaign and on the location asset across several days.