Directions Clicks as Conversions: A Contact Cost Audit

Igor Ivitskiy

Igor Ivitskiy

  • #6 in The Top 50 Most Influential PPC Experts
About the author ↓

Published 8 min read

In this article
  1. What the owner asked
  2. What counted as a conversion
  3. How we calculated
  4. What we found
  5. Why this is dangerous for the business
  6. What to check in your account
  7. When this does not apply
  8. Questions and answers
  9. Is a get directions click a contact with a person?
  10. Should you turn off directions measurement?
  11. What should you do when a direct contact costs more?
In short: Get directions clicks and intermediate actions were mixed into the contact count for medical and aesthetic services. Without them, the estimated cost of a direct contact was almost 4 times the level with them included. This is an audit finding, not a result after changes.

A cheap conversion in a Google Ads report is sometimes a map button. That button does not hold a booking. The person asks for a route to an address.

For medical and aesthetic services in the Ukrainian market, our team split the contact figure in automated campaigns. In a calculation excluding get-directions clicks and intermediate actions, the estimated cost of a direct contact was almost 4 times the level with those actions included.

The general picture of a goal built on the wrong action is on the page about a misconfigured conversion in Google Ads. This page is one finding, and two calculations in words, with no sums from the account.

What the owner asked

I am not naming the company. The question was about the cost of a contact. In the report that cost looked lower than the direct contact action, and we needed to see what the number was made of.

A service owner reads cost per conversion as the price of a conversation or a booking. In the account it is often the price of any action placed in the goal as valuable. I have run ads since 2006, and I see this mix often. The report counts whatever is easy to record.

What counted as a conversion

A conversion action is a specific customer activity that a business treats as valuable. It is measured, and that measurement can shape bids. That is how the Google Ads help page on conversion measurement describes a conversion action.

Three different things sat in this account’s contact figure: get directions clicks, intermediate actions, and a direct contact. The finding does not name the buttons behind the intermediate actions. The direct contact is named as an action, without a button name. A call, a form, or a message would be a guess, so they are not here.

A get directions click is the local action Get directions. It counts Directions or Start clicks, meaning the start of navigation, on a business location during or after an ad interaction. The button can be clicked in the ad, or later, on an ordinary search result for that location. That is on the page about local actions conversions. The action is available in reports. Help allows bidding on it in Search, in Performance Max, and in Shopping. In Search, that bid is available for directions.

For a campaign to optimize toward these clicks, the action is set to primary and included in the campaign goals. That rule is on the page about local ads, not a note about this account. The finding does not record whether the setting was exactly that. It records something else: directions clicks and intermediate actions were inside the contact figure.

A primary conversion action is reported in the Conversions column and used for bidding when the campaign uses that standard goal. A secondary conversion action stays for observation in the All conversions column and is not used for bidding, even when the goal is on. The exception is a custom goal: it uses the action for bidding either way. The page on primary and secondary conversion actions is the source for that split.

How we calculated

Cost per conversion in the account is your cost divided by the number in the Conversions column. The division uses only interactions that can be tied to a conversion. That is how the help page on conversion tracking data defines it.

Our team ran that logic twice. Ad cost is the same in both calculations. The denominator changes, meaning the set of actions we call a contact. More actions in the denominator, at the same cost, make one action look cheaper. Direct contacts do not increase because of that.

CalculationDenominatorWhat you get
All actionsDirections clicks, intermediate actions, and a direct contactThe cost level with those actions
Direct contact onlyThe direct contact action onlyThe estimated cost of a direct contact

What we found

The second level was almost 4 times the first. That is the finding for medical and aesthetic services in the Ukrainian market, in automated campaigns. Directions clicks and intermediate actions widened the denominator. The multiple is about the estimated cost of the direct contact action.

Why this is dangerous for the business

An automated campaign fits bids to the actions inside the number it optimizes. If a directions click and an intermediate action sit in that number next to a direct contact, the strategy treats them as the same success. The report shows a lower cost because the denominator is wider. People who actually got in touch did not increase.

The owner compares that lower figure with the budget they are willing to keep for a person who wants the service. The figure is built from a wider set. A decision to add budget then rests on the wrong action.

A correctly measured directions click still spoils the cost of a contact when a contact, for you, is not a route on a map. A wider pass over the account is in the diagnostic tree for a Google Ads audit.

What to check in your account

The check takes 10 minutes once your goals are open. The menu names below are the ones in Google’s help.

  1. Open the Goals menu, then the Conversions list, then Summary. See which actions sit in the goal your campaigns use.
  2. Find the local directions action. Help calls it Get directions. Next to it, look at intermediate actions added to the goal earlier.
  3. For the goal that contains those actions, open Edit goal and the Conversion action optimization block. Primary puts the action in the Conversions column and into bidding when the goal is used for bidding. Secondary (observe only) leaves it in the All conversions column. A custom goal uses the action for bidding even with a Secondary setting.
  4. Take ad cost for one and the same period. In the Campaigns menu, open Campaigns and, above the table, select Segment, then Conversions, then Conversion action, so you see the report by each action. Divide it by every action now sitting in the contact figure. Then divide the same cost only by the actions you truly treat as a direct contact.
  5. Compare the two results. If the second is plainly higher, the cheap conversion in the report is a wider set than a conversation with a person.

If you see the same mix in your own account, the step-by-step version is in my book on Google Ads for business owners.

Want the system, not scattered tips?

My e-book “19 Google Ads Secrets”: how to get the most out of Google Ads without draining your budget, drawn from real campaigns and tests.

See the book →

When this does not apply

This finding is not about your account if a directions click is outside the number you use for cost and outside the number the campaign bids on. A secondary action that is not in a custom goal shows up in the all conversions column. It does not paint a mixed cost in the conversions column.

This finding is also not about your account when a directions click is the result you want. A shop lives on visits, and you placed get directions clicks in the goal on purpose. Then the mix is the goal, not a distorted contact.

This is an audit finding, not a result after a change: this is an estimated metric for a direct contact action, and such a contact does not by itself confirm a booking or subsequent visit.

Questions and answers

Is a get directions click a contact with a person?

No. It is a click on the directions button, or the start of navigation, on a business location during or after an ad interaction. The person may open a map and never arrive. For medical and aesthetic services, our team separated that click from a direct contact.

Should you turn off directions measurement?

You can keep the measurement. Take directions out of the number an automated campaign learns from, if a route on the map is not what you sell. A secondary setting shows the action in the all conversions column and does not drive bids, unless the action sits in a custom goal.

What should you do when a direct contact costs more?

Do not add budget only because the mixed figure looks calm. Compare it with the direct contact calculation in the table above. Base the budget decision on the action you actually want.